Skip to content

Video Decode & Convert SBC Benchmark Rankings

How fast each Single Board Computer decodes and converts video in software with FFmpeg

18 boards tested · results from 21.3 to 275 (Frames per Second, HEVC 1080p Decode)

18 results
Workload

Full Results

0100200300
  1. 1
    Fastest Overall: Orange Pi 6 16GBP1 · $359
    275 fps
  2. 2
    Orange Pi 5B 4GBRK3588S · $203
    163.3 fps
  3. 3
    Fastest Under $150: Cool Pi 4B 4GBRK3588S · $140
    162.6 fps
  4. 4
    Radxa ROCK 5B+ 16GBRK3588 · $385
    138.2 fps
  5. 5
    120.2 fps
  6. 6
    Best Value: Orange Pi Zero 3W 4GBA733 · $50
    101.2 fps
  7. 7
    100 fps
  8. 8
    Banana Pi CM4 4GBA311D · $104
    94.3 fps
  9. 9
    93.5 fps
  10. 10
    Banana Pi M5 4GBS905X3 · $133
    40.8 fps
  11. 11
    DEBIX Model A 4GBiMX 8M Plus · $135
    35.6 fps
  12. 12
    Radxa ROCK 3B 2GBRK3568 · $51
    31.6 fps
  13. 13
    Khadas VIM1S 2GBS905Y4 · $119
    30.4 fps
  14. 14
    27.1 fps
  15. 15
    25.7 fps
  16. 16
    25.6 fps
  17. 17
    21.4 fps
  18. 18
    21.3 fps
0100200300
Frames per Second (software), higher is better
Showing 18 boards · median 93.5 fpsTop Picks from above

Frequently Asked Questions

What is the fastest single board computer in Video Decoding (HEVC 1080p Decode)?

The Orange Pi 6 16GB currently tops our Video Decoding (HEVC 1080p Decode) ranking with 275 (Frames per Second), measured on real hardware with our standardised test setup.

What is a good Video Decoding (HEVC 1080p Decode) score for an SBC?

Across the 18 boards we have tested, Video Decoding (HEVC 1080p Decode) results range from 21.3 to 275 (Frames per Second), with a median of 93.5. Anything above the median puts a board in the faster half of the market.

About Video Decode & Convert SBC Benchmark Rankings testing

We decode short clips of the open film Tears of Steel with FFmpeg as fast as the board can, measured in frames per second, and convert H.264 to HEVC and AV1 with each encoder's default settings. This is software decoding on the CPU, the same FFmpeg build on every board, so the numbers compare the processors directly; 24 fps is real time for these clips. Clips are loaded into memory first, so storage speed doesn't matter. Hardware decode speed and which formats the board's video engine handles are on each board's page. Each workload has its own ranking; switch between them above. Higher is better.